CNC Air Intake Ram Pod

Suits WRX/STi MY01 to MY05 Models only

FILTER CLEANING INSTRUCTIONS

CLEANING:
Wash using mineral turps. Use a turps soaked cloth and wipe dust from the filter surface. Service every 10,000km, however if driving in dusty conditions service at 5,000km.

RE-OILING:
Mix “Filter Fix” oil with mineral turps at 50/50 ratio. Apply mix to the entire foam surface then pad excess until foam is moist, but not wet.

WARNING:
Strongly advise against using filter oil designed for cotton gauze filters. This filter oil may seem similar but it is far from it. If you use this type of oil you may run the risk of severely damaging your engine.